Interior wall emulsion paint

TuShua Wang Odorless Eco-Friendly Water-Based Paint features easy application, good adhesion, and strong coverage, making it an economical and practical interior wall paint. It provides long-lasting decorative effects, is cost-effective and durable, meets environmental protection technical requirements, and is suitable for decorating the walls, ceilings, gypsum boards, and wooden partitions of large buildings such as residences, hotels, hospitals, and schools. It can be used on surfaces such as cement, gypsum boards, and masonry structures.

Product Features:

Application Methods: Roller, Brush, Airless Spray

Theoretical Paint Consumption:

■ 12-13 square meters per liter per coat (based on a dry film thickness of 30 microns).
■ Actual paint consumption may vary depending on the roughness of the surface and the dilution ratio.

Dilution:

■ For easier application, dilute with no more than 20% (by volume) clean water as needed (adjust according to the desired application feel);
■ Stir thoroughly before use.

Features:

1. Easy to apply 2. Good adhesion
3. Strong coverage 4. Large coverage area

Substrate Preparation

Surface Treatment	New wall – Remove surface dust, grease, and loose plaster. Repair any pores promptly to ensure the wall is clean, dry, and even.	Repainting wall – Scrape off unsound old paint film, remove surface dust, chalk, and impurities. Level, sand, clean, and dry thoroughly.
Surface Condition	Ensure the moisture content of the pre-coated substrate is less than 10% and the pH value is less than 10.	The pre-coated substrate surface must be sound, dry, clean, even, and free from loose material.

Coating System and Number of Coats

Coating System	Primer	Topcoat
Application Conditions	One coat of sealer primer	Two coats of “Brush King Odorless & Eco-friendly” interior wall paint

Recoat Time (based on a dry film of 30 microns at 25~30℃)

■ Surface Dry:

30 minutes   ■ Hard Dry: 60 minutes   ■ Recoat: Minimum interval of 2 hours

Curing Time

■ 7 days/25℃: In low temperatures (not below 5℃), extend appropriately to achieve the desired film properties.

Application Conditions

■ Do not apply in humid or cold weather (temperature below 5℃, relative humidity above 85%), otherwise the expected coating results may not be achieved.

Cleaning

■ During pauses in application and after completion, promptly clean all tools with water.

Storage

■ Keep tightly sealed and store in a cool, dry place at 0-35℃.

Safety Precautions

■ Be sure to carefully read the application instructions on the product label before use to ensure reliable and satisfactory coating results.
■ Open all doors and windows before starting and during use to ensure adequate ventilation in the work area.
■ If you have sensitive skin, always wear protective gear during use; if it comes into contact with the eyes, rinse immediately with plenty of water; if it contacts the skin and causes pain or irritation, rinse immediately with plenty of water and seek medical attention.
■ Keep children and pets out of the work area and store the product out of their reach. If it comes into contact with children, rinse immediately with plenty of water and seek medical attention.
■ To ensure coating quality, properly separate, cover, and mask wooden items and wall areas. To better maintain a clean work site and avoid messy operations, apply wood paint first, allowing it to dry before applying latex paint.